Multi-functional Maintenance Station
PCB Multi-functional Maintenance Station
High-Precision PCBA Repair & Maintenance Station
Product Specifications
| No. | Project | Technical parameters | |
| 1 | Dimensions (L * W * H)mm | L1490mm*W1854mm*H1400mm(When the display is fully extended, W is about 1600mm during operation) | |
| 2 | Equipment weight (Kg) | 350kg | |
| 3 | Power source | Single-phase three-wire AC 220V, 50Hz, must have ground wire | |
| 4 | Circuit breaker/main switch A | 15A | |
| 5 | Maximum power consumption KW | 2.2KW | |
| 6 | Effective processing range mm | 200mm*200mm-711mm*730mm | |
| 7 | Processing thickness mm | (0.05-3.85)mm | |
| 8 | Production speed | Maximum: 1 second ,Typical:0.5 of a second | |
| 9 | Safety precautions | Photoelectric protection, limit switch, emergency stop switch | |
| 10 | Storage of production parameters | At least 1 T of hard disk storage | |
| 11 | Light source | LED side light, ring light, UV purple | |
| 12 | Magnification | 30-200X | |
| 13 | Examine and repair camera | SONY | |
| 14 | Minimum maintenance line width/line spacing | 1mil/1mil | |
| 15 | AOISupport AOI | AOI Image、Orbotech、Optima、Screen、Machvision、Camtek、Eagle-eye、 TZTEK、Hans、OV、UT、Jiejun | |
| 16 | Vacuum table | Air can be aspirated in different areas | |
| 17 | Humidity | ＜65% | |
| 18 | Temperature | 20±10℃ | |