OPE Punching Machine
Automatic PCB Target Punching Machine
CCD Guide Hole Punching Machine
Product Specifications
| No. | Project | Technical parameters | |
| 1 | Dimensions (L * W * H)mm | L 2688mm×W 1380mm×H 1780mm | |
| 2 | Equipment weight (Kg) | 2600Kg | |
| 3 | Power source | 380V 50Hz | |
| 4 | Maximum power consumption KW | 6KW | |
| 5 | Effective processing range mm | Max:32×26 inchMin:14×12 inch | |
| 6 | Processing thickness mm | 2.0-40mil 40-60mil(Punch needle and template need to be replaced) | |
| 7 | Production speed m/min | Automatic line 8 pnl/min(Mechanical running speed 10 pnl/min) | |
| 8 | Equipment capacity | 9600PNL/ 209600PNL/day based on 20 hours | |
| 9 | Visual measurement accuracy | ± 0.3milWithin±0.3mil | |
| 10 | Die reproduction accuracy | ± 0.5milWithin ± 0.5mil | |
| 11 | Integrated reproduction accuracy | ± 0.8milWithin ± 0.8mil | |
| 12 | Counterpoint system | Pre-counterpoint segment: 2 CCD Punching host counterpoint: 4 CCD | |
| 13 | Positioning method | 1. Pre-counterpoint segment: Image recognition system +XYY platform coordinate system 2. Punching segment: Image recognition system +XYθ platform coordinate system | |
| 14 | Light source mode | Upper and lower light sources are convertible and aren’t confined to negative and positive plate | |
| 15 | Number of holes punched | Plate frame signed by both parties (able to be specified) shall prevail | |
| 16 | Intelligent Control | Four-level access control management | |
| 17 | SPC curve charts and punching data waveform display | ||
| 18 | SPC shrinkage control with X/Y direction compensation | ||
| 19 | Automatic punching operation job | One health operation | |