Resin Plug Hole Grinding Line
PCB Resin Plug Hole Grinding Line
PCB Ceramic Brush Grinding Line
Product Specifications
| No. | Project | Technical parameters | |
| 1 | Dimensions (L * W * H)mm | (L)9108mm*(W)3500mm*(H)2600mm | |
| 2 | Equipment weight (Kg) | ≈7260kg | |
| 3 | Power source | 3phase 380V 50HZ/60HZ 63KW | |
| 4 | Maximum power consumption KW | 61KW | |
| 5 | Effective processing range mm | Min:250mm*250mmMax:622mm*1200mm(Narrow edge loading) | |
| 6 | Processing thickness mm | Min:0.3mmMax:3.5mm | |
| 7 | Production speed m/min | 0.5～6.0m/min，adjustable | |
| 8 | Equipment capacity | For example: 2.0m/min calculation, board size 622 * 544mm, wide edge feeding, board spacing 70mm, production capacity: 2000/(544+70) * 60min=195pnl/hr | |
| 9 | Brush change time | Fast change brush(≤3min/pc) | |
| 10 | Save water& electricity | Water and power saving function (time can be set freely) | |
| 11 | No need to zero point | Zero free design, no need to reset, the board can be ground by turning on the machine. Reduce production auxiliary time and improve equipment utilization rate | |
| 12 | Quick grinding mark, quick brushing | Quick abrasion, quick brushing, preparation time ≤ 1 minute | |
| 13 | Panel thickness monitor and pressure adjust | Automatic thickness measurement, automatic pressure adjustment | |
| 14 | Safty control & alarm | Protective cover, door limit switch (open the door alarm forced stop), emergency stop switch, the whole machine grounding, leakage protection, safety signs, over-temperature alarm, anti-dull design, etc. | |
| 15 | Automatic oiling of bearings and guide rails | Greatly improve the service life of bearings | |