Soldermask Pre-treatment Line
PCB Soldermask Pre-treatment Line
Solder Mask Surface Preparation Equipment
Product Specifications
| No. | Project | Technical parameters | |
| 1 | Overall dimension (L*W*H) | 15536mm(L)x2018mm(W)x3000mm(H) | |
| 2 | Equipment weight (Kg) | ≥9300Kg(without solution) | |
| 3 | Electric control cabinet size （mm） | Electric box on the top of the machine, which does not occupy space | |
| 4 | Power source | 3PH-AC380V+N+PE, 50/60Hz | |
| 5 | Circuit breaker/Main switch | 150A | |
| 6 | Maximum power consumption KW | 69KW | |
| 7 | Heating power KW | 24KW()(Including peripheral cylinder heater power) | |
| 8 | Air pressure bar | 6.0-7.0bar | |
| 9 | Tap water | 5-8 L/min | |
| 10 | DI water | 5-8L/min | |
| 11 | Refrigerated circulating water | 60-65 L/min | |
| 12 | Heating circulating water | NA：Electrically heated | |
| 13 | Exhaust air volume CMM | 6.0m³/min”Non-dry baord section”18.0m³/min “Dry board section” | |
| 14 | Effective processing range mm | Min:350*400mmMax:550*650mm | |
| 15 | Processing thickness mm | Min:0.3mmMax:3.5mm | |
| 16 | Production speed m/min | 1.0~5.0m/Min, Adjustable「 Working speed preset:2.5m/min」 | |
| 17 | Deep plating capability | Aspect Ratio 12.5:1 | |
| 18 | The precision grinding board section is equipped with automatic board thickness measuring device, automatic pressure regulation and automatic wear mark measuring function | / | |
| 19 | Precision grinding board section with copper powder recovery machine x1 set | / | |
| 20 | Medium coarsening swing spray, spray rack made of stainless steel, not easy to deform | / | |
| 21 | With board jammed alarm, shutdown without board, water and electricity saving features | / | |
| 22 | Each machine is equipped with a cleaning hose for easy maintenance | / | |
| 23 | Micro-switch installed on the top cover of all water washing or medicinal water section filters, open the cover to stop the pump protection | / | |
| 24 | All medicinal water section of the top cover with the door with the protection function, open the cover to stop the pump protection | / | |
| 25 | The filter bucket is injection molded in one piece, there will be no bad welding leakage problem. Washable filter bucket can switch different filter cartridges, no need to replace the filter bucket, can be installed with filter mesh, filter cotton bag, filter cotton cartridge | / | |