Vacuum Lamination Press System
Vacuum Lamination Press System
Hydraulic Vacuum Press for PCB
Product Specifications
| No. | Project | Technical parameters | |
| 1 | Dimensions (L * W * H) | Hot press: 1344*1882*3951mm Cold press: 1090*1410*3443mm | |
| 2 | Floor load (T/m ²) | 20KN/㎡ | |
| 3 | Power source | 380Volt,AC,3Phase,50Hz | |
| 4 | Maximum power consumption KW | 57.3KW | |
| 5 | Air source specification | Air consumption：50 L/minAir pressure： 0.6-1.0 Mpa | |
| 6 | Applicable steel board size mm | 787mm*1295mm*1.6mm | |
| 7 | Boiler | Secondary furnace, thermal coal pump, thermal coal motor, proportional control valve | |
| 8 | Hot presser | Motor, heating board, body, hydraulic piston, vacuum sealing strip, thermocouple, hydraulic component，2 heat presser | |
| 9 | Cold presser | 1 cold presser | |
| 10 | Vacuum system | Body, hydraulic piston, cooling board, thermocouple | |
| 11 | Hydraulic system | Motor, duplex pump | |
| 12 | Electronic control system | Computer host, PLC, temperature sensor, pneumatic solenoid valve, safety control components, position sensors and other electronic components | |
| 13 | Feeding/discharging system/trolley | Push-pull motor, lifting motor, roller rotation motor, pneumatic components, linear guide rail | |