Fully Automatic Pin Removing
Automatic PCB Pin Removal Machine
PCB Depinning Equipment
Depinning System
Product Specifications
| No. | Project | Technical parameters | |
| 1 | Overall dimension (L * W * H) mm | L11325*W2046*H1981mm | |
| 2 | Equipment weight Kg | 2000Kg | |
| 3 | Power Hz | AC380V/50Hz | |
| 4 | Maximum power consumption KW | 10KW | |
| 5 | Air source specification | Air pressure: 0.6-0.7 MPa, Air consumption: 600 L/min | |
| 6 | Equipment dust collection m³/min | 10m³/min | |
| 7 | Effective processing range mm | Min:350*350mmMax:650*760mm | |
| 8 | Processing thickness mm | Min:0.3mmMax:3.5mm | |
| 9 | Production speed pnl/min | 6-7pnl/min | |
| 10 | Operation mode | →pin→→→→ Automatic feeding → pin removal → laser tapping → aluminum sheet collection → distinguish between reusable and scrapped base boards → separate boards and connect the rear equipment | |
| 11 | Number of lasers | Standard 1 set | |
| 12 | Board closing mode | Wiring hole inspection machine and other equipment | |
| 13 | Board placing mode | Horizontal double station | |
| 14 | Safety grating | 2 (feed port configuration) | |
| 15 | Ethernet MES port reserved for PLC | PLC with Ethernet port | |
| 16 | Differentiation of backing boards | Equipped with CCD to distinguish the secondary base board and the scrap base board | |
| 17 | Automatic turnover | Automatic induction turn-over design (incoming materials can be front or back) | |
| 18 | Transfer vehicle | 4 | |
| 19 | Add | Number of lasers (add 1 set of 2 lasers for cutting) | |